Self Priming Siphon Hose
with Copper Siphon Valve

SAFE
With this inexpensive little siphon hose pump, you can transfer water from your 55 gallon water
storage drum to a portable container with ease, and without the unpleasant
hassle of mouth to hose contact. Siphon pump can also be used to siphon gasoline and many other liquids. This is not designed to fit into auto gas tanks.

SIMPLE
The 1/2" diameter siphon hose has a self priming copper siphon valve on one end which will start the
siphoning of water by merely shaking the end in a quick up and down
motion while under water. 



Draining small pools, aquariums, and water beds are just a few of its uses.
Siphon pump will siphon most liquids safely and easily.

• Safely transfers liquids up to 3-1/2 gallons per minute
• 3/4" copper siphon valve pump head with glass ball and stainless steel spring
• Safe anti-static pump and 6'  of hose
• Simple, Safe and Easy to Use
• Made in the USA

$9.95

Siphon Pump Valve Head Replacement for Tubing


Make Your Own Self Priming Siphon Pump to any size length

• 3/4" copper anti static pump with glass ball and stainless steel spring
• Safely transfers liquids Up to 3-1/2 gallons per minute

$6.95

Instructions for Use
Before using, drain all liquid from hose.
Submerge pump into liquid that is to be siphoned. End of tube must be lower than pump before siphoning will start.
Move pump vigorously in an up and down motion. It is important that the pump remain
in liquid at all times to start the siphoning. Once the flow starts, stop moving or shaking
the pump as gravity will maintain the flow of the liquid.
Once siphoning starts, keep the pump submerged in liquid.
To stop siphoning, remove the pump from liquid or to momentarily stop the flow, raise the end of the tube up to the level of the water being siphoned.
Drain all liquid from hose and clean thoroughly.
Store in a cool dry place.